NiCERA SBG446-671/RE46B Yükseltme PIR sensörleri 12 v bewegungsmelder pir bewegungsmelder bewegungsmelder mit kamera

FOB Referans Fiyat:En Yeni Fiyatı Alın
$0,45 - $3,00 / Adet | 1 Adet / Adet (Min. Sipariş)
rapor Şüpheli Etkinlik
Genel Bakış
Hızlı Detaylar
Menşe Yeri:
Japan
Marka adı:
NICERA
Model Numarası:
SBG446-671
Kullanım:
Pozisyon sensörü
Teori:
Optik sensör
Çıkış:
Anahtar dönüştürücü
Nicera pir sensörü:
Nicera pir sensörü RE200GE
Paketleme & Kargo
Liman
Incheon Port of KOREA
Tedarik Süresi: :
6000per 30~60days
JAPAN (NiCERA)
RE46B UPGRADE !
SBG446-671
More Stable,
Less Error For Outdoor Usage
NiCERA SBG446-671 / RE46B Upgrade PIR sensors 12v bewegungsmelder pir bewegungsmelder bewegungsmelder mit kamera
( http://fresnelfactory.com/fresnel_list/RE200GE_140909.pdf )
 
Electrical characteristics (at 25 (+/-) 5 degC)
1) Circuit configuration : Three-terminal sensor with source follower
2) Operating voltage : 3 ~ 10 V dc (Rs: 470kohm)
3) Element polarity : Element A,C:(+) B,D:(-) or A,C:(-) B,D:(+)
4) Source voltage : 0.35 ~ 1.4 V (Vd: 5V, Rs: 470kohm)
5) Signal output : Min. 4.5 Vp-p (Typ. 6.5 Vp-p)
(S1, S2)
Signal output is measured at chopper frequency of 1 Hz when connected to the amplifier of gain 72.5 dB (at 1 Hz) and submitted to the emission of Infrared energy of 13 microW/cm2 from 420 K Black Body.
6) Noise output : Max. 250 mVp-p (Typ. 120 mVp-p)
Noise output shall be measured for 20 seconds when connected to the amplifier of gain 72.5 dB (at 1 Hz) and shut out from Infrared energy.
7) Balance output : Max. 15 %
[|S1-S2| / |S1+S2|]<= 0.15
S1 : Signal output on Element A + C
S2 : Signal output on Element B + D
Balance output is measured at chopper frequency of 1 Hz when connected to the amplifier of gain 72.5 dB (at 1 Hz) and submitted to the emission of Infrared energy of 13 microW/cm2 from 420 K Black Body.
8) Frequency response : 0.3 Hz to 3.0 Hz / (+/-) 10 dB
 
Optical characteristics
1) Field of view : 132° from center of element on axis X,Y
: 146° from center of element on 45°
: See Figure 1-a
2) Filter substrate : Silicon
3) Cut on (5 %T ABS) : 5.5 (+/-) 0.5 micron
4) Transmission : >=70 % average 8 to 13 micron
 
Environmental requirements
1) Operating temperature : -30 degC to +70 degC
2) Storage temperature : -40 degC to +80 degC
3) Relative humidity : The sensor shall operate without increase in noise output when exposed to 90 ~ 95 % RH at 30 degC continuously.
4) Hermetic seal : The sensor shall be sealed to withstand a vacuum of 21.28 kPa.
 
RoHS compliance
This product conforms to the RoHS Directive in force at the date of issuance of this Specification Sheet.
 
Configuration (Figure 1) 
According to our customer’s needs, we recommend ideal solution from our 106 existing products, which are increasing in diversity.
We are prepared to take from design to prototype to volume production.
Contact
Email : Kim.diypro@gmail~


Please visit our Developed Case List and see our achievements.
 
Beğeneceğiniz
Tam olarak istediğiniz gibi değil mi? 1 talep, birden çok teklif Teklifleri Şimdi Al >>
Beğeneceğiniz
Kolaylığınız için bu ürün yada tedarikçi sonuçları çeviri araçları kullanılarak çevrilmiştir. Çevirilerle ilgili bir tavsiyeniz varsa, lütfen gelişmemize yardımcı olun.
All product and supplier information in the language(s) other than English displaying on this page are information of www.alibaba.com translated by the language-translation tool automatically. If you have any query or suggestion about the quality of the auto-translation, please email us at (email address). Alibaba.com and its affiliates hereby expressly disclaim any warranty, express or implied, and liability whatsoever for any loss howsoever arising from or in reliance upon any auto-translated information or caused by any technical error of the language-translation tool.