MS POLİMER BAZLI SEALANT

FOB Referans Fiyat:En Yeni Fiyatı Alın
3000 Adet / Adet (Min. Sipariş)
rapor Şüpheli Etkinlik
Genel Bakış
Hızlı Detaylar
Menşe Yeri:
Istanbul, Turkey
Sınıflandırma:
Diğer yapıştırıcılar
Ana ham maddesi:
MS polimer
Kullanım:
İnşaat, Fiber ve konfeksiyon, Ayakkabı ve deri, Ambalajlama, Ulaşım, Ağaç işleme, Deniz
Marka adı:
BAUMERK
Model Numarası:
MS 501
Tedarik Gücü
Tedarik Gücü:
10000 Piece/Pieces per Day
Paketleme & Kargo
Paketleme Detayları
310 ml kartuş
Liman
ISTANBUL
Tedarik Süresi: :
3 days

Specifications

One component ,elastic, odorless and cured by air moisture general purpose MS polymer based sealant .It is an adhesive sealant a

   BAUMERK MS 501

 

 

   MS POLYMER BASED SEALANT

 

One component ,elastic, odorless and cured by air moisture general purpose MS polymer based sealant .It is an adhesive sealant as a environment friendly alternative  with outstanding performance for industry and building. It is an isocynate free,silicone free,overpaintable,non- corrosive ,UV-resistant  sealant.

 

Area Of Application

 

Sealing of expantion joints in prefabricated constructions,connection joints to windows, doors, connection joints on   metal, concrete and various   type of plastics. BAUMERK MS 501  is used in any place where silicone is used. It is overpaintable with any type of paints Painted surface can be cleaned by asetone and repaint by  a different colour paint. BAUMERK MS 501 is not being affected by temperature differences between –40 0C,+90 0C

 

Application  and Preparations Of the Surfaces

 

Surfaces must be clean, dry and dust and oil free. Primer is not necessary. Primer  PB1 should be used   for porous surfaces as concrete,stone...etc, primer PC2 for non porous surfaces as glass,ceramic,metal,...etc.

 

Technical Data

 

Alkali chemicals, water, oil and greases do not effect after curing of sealant. Aromatic chemicals and ketones may be effect in long term contact

Density                                                                       : 1,49    g/cm3

Volume loss                                                               : 2%

Surface Hardness (23C 50% RH  after 3 weeks ):22 Shore A

Consistency                                                                : no sag   in joint width of 40 mm

Movement Capacity                                                 : 25 % Elasticity      : over 70 % Tensile Strength 100%                                     : 0,40 MPa

Skin Formation                                                          :35-40  minutes

Curing Rate (230 C 50 %RH)                                     :2,5mm  in 24 hours

4 mm     in 48 hours Service Temperature                                                              : -40 C  , +90 C Application Temperature                                                              : +5C/ +40 C

Packing                                                                       : 310 ml cartridges, 200 l drums

Colour                                                                        : White, grey, black and any colour depend on requirement

Shelf life                                                                     : 12 months

 

 


 

Beğeneceğiniz
Tam olarak istediğiniz gibi değil mi? 1 talep, birden çok teklif Teklifleri Şimdi Al >>
Beğeneceğiniz
Kolaylığınız için bu ürün yada tedarikçi sonuçları çeviri araçları kullanılarak çevrilmiştir. Çevirilerle ilgili bir tavsiyeniz varsa, lütfen gelişmemize yardımcı olun.
All product and supplier information in the language(s) other than English displaying on this page are information of www.alibaba.com translated by the language-translation tool automatically. If you have any query or suggestion about the quality of the auto-translation, please email us at (email address). Alibaba.com and its affiliates hereby expressly disclaim any warranty, express or implied, and liability whatsoever for any loss howsoever arising from or in reliance upon any auto-translated information or caused by any technical error of the language-translation tool.