HM-10 HM-10C CC2541 BLE Bluetooth to UART Transceiver Module

 HM-10 CC2541 CC2540 BLE Bluetooth to UART Transceiver Module

4.0 BLE bluetooth to uart transceiver Module Central Peripheral HM-10 CC2540

•100% Brand new and high quality.

•support Central and Peripheral mode switch, modify by AT commander

support Remote control mode, remote device can control PIO pin or modify settings by AT commander when Connected. (such as Iphone4s/5 ipad, Note2 etc.)
Product parameters

.Working frequency:2.4GHz ISM band

.Modulation method: GFSK(Gaussian Frequency Shift Keying)

.RF Power:≤4dBm, Class 2

.Sensitivity:≤-84dBm at 0.1% BER

.Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps

Synchronous: 1Mbps/1Mbps(Max)

.Security: Authentication and encryption

.Service: Bluetooth SPP(Master & Slave)

.Power:+3.3VDC 50mA

.Working temperature:–5 ~ +65 Centigrade

.Size:26.9mm x 13mm x 2.2 mm

.Flash:256Kb

Additional introduction:

HM-10 is Bluetooth V4.0 BLE version. Use TI Chip. HM Bluetooth module use CSR BlueCore or TI CC2540, Master and slave roles

in one, transmission version and remote control version and PIO state acquisition functions in one, Support the AT command modify

module parameters, Convenient and flexible. Transmission version can be used to transmit data between two Bluetooth devices.Remote

Control version can be used to Control PIO ports output high or low level without any other MCU.

AT Commanders (new version V542)

AT                         (Test command)
AT+BAUD           (Query/Set Baud rate)
AT+CHK             (Query/Set parity)
AT+STOP            (Query/Set stop bit)
AT+UART            (Query/Set uart rate,parity, stop bit)
AT+PIO                (Query/Set PIO pins status Long command)
AT+PIO                (Query/Set a PIO pin sttus Short command)
AT+NAME           (Query/Set device friendly name)
AT+PIN                (Query/Set device password code)
AT+DEFAULT     (Reset device settings)
AT+RESTART     (Restart device)
AT+ROLE            (Query/Set device mode, Master or Slave)
AT+CLEAR          (Clear remote device address if has)
AT+CONLAST    (Try to connect last connect succeed device)
AT+VERSION     (Show software version information)
AT+HELP             (Show help information)
AT+RADD           (Query remote device address)
AT+LADD            (Query self address)
AT+IMME            (Query/Set Whether the device boot immediately)
AT+WORK          (if device not working, start work, use with AT+IMME command)
AT+TCON           (Query/Set Try to connect remote times)
AT+TYPE             (Query/Set device work type,  transceiver mode or remote mode)
AT+START          (Switch remote control mode to transceiver mode)
AT+BUFF            (Query/Set How to use buffer data, Duing mode switching time)
AT+FILT              (Query/Set device filter when device searching)
AT+COD              (Query/Set Class of Device. eg: phone, headset etc.)

About Us

As a gloal distributor of electronic components,we stocking the world's widest range products of semiconductor and electronic components.

You can get one stop service here include BOM purchasing,testing,design for your project.

Our experienced team is providing the most excellent service to meet your needs and satisfaction.

Shipping

 01.No handing fee, and no minimum order.

02.All shipping charge, duties,insurance and taxes fee will be paid by the customer.

03.Free shipping service available, depends on destination country,order amount, or package size and weight.

04.All products are packing under good condition with suitable size.

Pls contact our sales representativefor more courier information about shipping.

We haveSmart logisticssupporting,Save Time, Save Money.

Warranty

1.All products with 1year warranty from the date received.

2.Full amount refund or replacement for defective merchandise within warranty period.

Shop here with confidence!! (We provide excellent after-sales service and supporting)

Return Policy

1. Please contact our sales representative to obtain an RMA number before returning the products back.

2. Return freight charge will paid by the customer.

3. We will not taking any charge that effect during return back due to customer's error.

Payment

Smart Payment Options

How to reach us