Manual press brake

Using a manual press brake is an efficient way to bend metal sheets with precision. This machine is mainly used to bend sheet metal and is operated manually. A hand press brake machine is the most basic machine for bending operations. It is composed of a bracket, a worktable, and a clamping plate. The worktable is fixed on the bracket, and the workbench is composed of a base and a pressure plate. The base is connected by a hinge and a hinge pin. The base is connected by a hinge and a hinge pin. One end of the pressure plate is provided with a clamping plate, and the other end is clamped by the screw on the base. A column is set on the base. The column is used to support the fuselage. The column is equipped with a pedal and a compression device. The bending machine is composed of a bracket, a worktable, and a clamping plate. The worktable is composed of a base and a pressure plate. The base is connected by a hinge and a hinge pin. The base is connected by a hinge and a hinge pin.

Introduction of Amada Bending Machine Manual

An Amada bending machine manual is a machine for bending thin plates. It mainly consists of a bracket, a worktable, and a clamping plate. The worktable is fixed on the bracket. The worktable is composed of a base and a pressure plate. The base is connected to the base by a hinge. The base is connected by a hinge and a hinge pin. One end of the pressure plate is provided with a clamping plate, and the other end is clamped by the screw on the base. The base is equipped with a column to support the fuselage. The column is equipped with a pedal and a compression device. The base is equipped with a column to support the fuselage. The column is equipped with a pedal and a compression device. The base is equipped with a column to support the fuselage. The column is equipped with a pedal and a compression device.

It is suitable for the bending of steel plate, stainless steel, aluminum alloy, copper plate, and many other metal materials. It can be used in the production of electrical cabinets, kitchen utensils, elevators, light poles, and other industries. The manual press brake is easy to operate and has simple programming steps, which can greatly reduce the difficulty of use. Additionally, it is equipped with a back gauge and a numerical control system, which can control the size and precision of the workpiece to meet the needs of different users. It has a wide range of bending angles and bending radiuses, which can be adjusted according to the material and thickness of the workpiece to achieve a more accurate bending effect. In addition, the manual press brake machine is convenient to adjust, and the upper die can be adjusted up and down to adapt to the bending of materials with different thicknesses.

When using the manual press brake, the operator must always pay attention to the position of the hand and ensure that it is not placed under the pressure plate to avoid the risk of pinching. It is not allowed to overload the machine during bending to prevent damage to the machine. It is necessary to check whether the fasteners are loose before use and tighten them in time. The hand press bending machine should be kept clean and the oil and dust on the surface should be cleaned in time. When bending, the operator should be concentrated and cooperate with each other to ensure safety. The manual press brake should be placed in a dry and ventilated place to prevent corrosion of the machine. For daily maintenance, the operator should add lubricating oil to the moving parts in time to ensure the machine operates normally. The operator should also check whether the electrical components are damaged regularly to prevent damage to the machine. The operator should also pay attention to whether the hydraulic system leaks oil and take measures in time.